What Is It?
The Labgear LDL206LP is a six way aerial amplifier that is designed to
increase and improve TV and FM signals. It has F connections and is
designed with professional installers in mind. The Labgear LDL206LP Aerial Amplifier is fully digital satellite compatible and has two inputs (UHF and VHF). The unusual feature of the Labgear LDL206LP is
that it can be used in a loft or roof space which does not have mains
power or has restricted mains power. The second smaller device you can
see in the image is the Labgear LDL206LP 's power unit. It plugs into
the mains elsewhere in the house and allows you to power the LDL206LP
through the RF coaxial cable.
How Does It Work?
You can connect the Labgear LDL206LP to any F connection equipped
device (usually satellite equipment). The LDL206LP then enhances any
signal passed through it. It has eight outputs - so you can run eight
TVs from it if you wish. The Labgear LDL206LP Aerial Amplifier has built
in filtering that eliminates interference from the 4G mobile phone
The Labgear LDL206LP can be used in conjunction the devices such as the Labgear MRX955 and the SLx Link to control a connected Sky decoder box. The Labgear MRX955 or SLx Link
can be used on every output except the one used to power the amplifier
(usually number one). To control other AV sources as well as a Sky box
you could expand the range of the Labgear MRX955 by using a Bluedelta Smart Blaster unit.
The Labgear LDL206LP Aerial Amplifier has a very low best noise figure (only 3.5 dB) giving minimal interference.
The Labgear LDL206LP does not have line powering, so cannot be used to power a masthead amplifier.
If you need F-Plugs, crimping tools or other installation accessories please see our Coaxial Accessories section.